类型：传动系列，端面固定
Type: Face driving center,Dead driving head type
适 用： CNC车床、高速车床、滚齿机及其他机床。
Application: CNC lathe and high speed lathe and auto feeder and gear hobbing machine or other machine tool.
特 点：使用本固定传动插式顶针可正、反转车削，使用前须先车削工件端面，才可使用，可前后同步车削工件一次加工完成。
Characteristics: Before using this center, Please machine the workpiece ends at first,it can be used to turn forward or reverse direction. it's suitable for front and rear synchronous turning so as to the turning process can be finished by one-time. different size center cone is available, So, it's convenient and cost saving.
注 意：使用本端面固定齿插式传动顶针，靠尾座足够压力，即可传动车削使用，尾座压力越高，传动力越大。
Note: Face driving by the enough pressure from the tailstock, stonger pressure, stronger driving force.
配 件：MT4套筒
Accessories: MT4 sleeve
检测顶尖的尖部跳动精度时，必须在顶尖顶紧工件的状态下进行打表。
Inspecting the run out accuracy of the center tip must be under the status of holding the workbar tightly.
F67-A型系列：
规格 / Specification 单位/ UNIT：mm 精准度 TIR：<0.005mm
|
型式/外表尺寸 Model/Spec |
A | B | C | D | D1 | G | L | Ø |
|---|---|---|---|---|---|---|---|---|
| F67-0408-4 | 45 | 39 | 9 | 8 | 4 | 31.267(MT4) | 147 | 60° |
| F67-0510-4 | 46 | 39 | 9 | 10 | 5 | 31.267(MT4) | 148 | 60° |
| F67-0612-4 | 47 | 39 | 9 | 12 | 6 | 31.267(MT4) | 149 | 60° |
| F67-0616-4 | 47 | 39 | 9 | 16 | 6 | 31.267(MT4) | 149 | 60° |
| F67-0820-4 | 49 | 39 | 9 | 20 | 8 | 31.267(MT4) | 151 | 60° |
|
F67-0823-4 |
49 | 39 | 9 | 23 | 8 |
31.267(MT4) |
151 |
60° |
| F67-0832-4 | 49 | 39 | 9 | 32 | 8 | 31.267(MT4) | 151 | 60° |
| F67-1025-4 | 51 | 39 | 9 | 25 | 10 | 31.267(MT4) | 153 | 60° |
|
F67-1032-4 |
51 | 39 | 9 | 32 | 10 |
31.267(MT4) |
153 |
60° |
| F67-1228-4 | 53 | 39 | 9 | 28 | 12 | 31.267(MT4) | 155 | 60° |
| F67-1432-4 | 54 | 39 | 9 | 32 | 14 | 31.267(MT4) | 156 | 60° |
非标需求可定制 Customized order can be accepted.
保留技术更改的权利 Subject to technical changes.
配件详情页/Accessories Page
顶尖技术要点与使用说明/Center technical user manual
