品牌/Brand：NTH

Omatei JDS 系列，是为高精度的铣削加工而设计，结构精巧，安装简易且精度稳定，适用于CNC加工中心及精雕机进行批量化生产作业。重复夹持精度高，并且稳定，能够大量降低换模时间，极大地提高生产效率。

产品特性：

为周定式不可回转，内置气缸直接驱动。采用膜片弹性技术，重复精度3μ以下。

永久性精密寿命高密封性设计，防水防尘能力。

轻松控制两端同心度、平行度。多段尺寸可分次加工、降低设备成本。

产品适用性：

适用CNC铣钻床 非标夹具等运用，可做联排多工位夹具使用。

适用于微电子产品、光学零件、医疗零件、轻薄高精密度工件的机加工。

精密元件的检测。

PRODUCT FEATURES
Fixed, non-rotating, directly driven by the built-in cylinder Employing diaphragm elasticitytechnology, with a repeatability of below 3uPermanent service life in precision; designed with high sealing performance and waterproofand dustproof capabilitiesAllowing easy control over the concentricity and parallelism at both ends Allowing separatesize processing over multiple sections to reduce equipment costsReplacing CNC multi-section simultaneous processing with single-action grinding machineAllowing fine-tunning with three-point clamping forceAPPLICATIONSSuitable for non-standard fixtures for CNC milling and drilling machines; may be used asrow-type multi-station fixtures
Suitable for machining of microelectronics products, optical parts, medical parts, thin andhigh-precision workpieces
Detection of precision components

单位Unit:mm

型号/Model 规格/Spec	工作压力 Kg/cm2	使用夹爪 Diaphragm	夹持行程 Opening/Closing Stroke	A	C	D	E	F	G	H	L	M
JDS4-60	2-7	JD-60	0.1	70	10	45	60	5	120	100	42.7	7
JDS5-70	2-7	JD-70	0.3	100	15	50	70	5	170	150	49.2	9
JDS6-100	2-7	JD-100	0.3	150	35	80	100	5	195	177	54.2	11
JDS8-150	2-7	JD-150	0.3	180	65	120	150	5	245	220	59.8	13

保留技术更改的权利,恕不另行通知 Subject to technology changes without prior information
非标需求可定做 Non-standard requirements can be made